Melt Flow Index Tester

With the help of our Asian Melt Flow Index Tester, you can thoroughly evaluate the flow properties of melted plastics or resins. In a thermoplastic materials company, the thermoplastic materials melt flow index is defined as the flow rate (in grams per ten minutes) of extrudates of molten resin through a jet of a particular length and diameter. Advantages of melt flow index tester Asian Melt Flow Index Tester is used to evaluate of melt plastics and flow characteristics of resins. The....

GET A QUOTE

With the help of our Asian Melt Flow Index Tester, you can thoroughly evaluate the flow properties of melted plastics or resins. In a thermoplastic materials company, the thermoplastic materials melt flow index is defined as the flow rate (in grams per ten minutes) of extrudates of molten resin through a jet of a particular length and diameter.

Advantages of melt flow index tester

Asian Melt Flow Index Tester is used to evaluate of melt plastics and flow characteristics of resins. The melt flow index of any thermoplastic material is defined as the rate of flow (expressed in grams per ten minutes) of molten resin through a jet of specific length and that material diameter. We conduct S-type testing under specified conditions of temperature, piston, and load position in a cylindrical cavity within a heated metal tube barrel. Our best-quality mfi testing machine conform to all standard temperature and pressure conditions as per ASTM D 1238-1992, ISO 1133, IS 2530-1963, IS 2267-1972, IS 10810-1984.

The Asian Melt Flow Index Tester is equipped with a microprocessor-based PID temperature controller. This MFI tester spans a temperature range from ambient to 400°C, with a resolution of 0.1°C and a precision of ±0.1°C. Provides accuracy.

Built on a sturdy metal base plate to increase stability and reduce discomfort during operation, the Asian MFI test machine boasts an Autumn Gray painting finish. The additional, shiny chrome/zinc used in it increases its corrosion resistance. The instrument is supplied with a calibration certificate obtained from a NABL-approved laboratory and an instruction booklet with good-quality electrical wiring diagrams. If you want to buy an Asian MFI Tester from us you can easily contact us.

The melt flow test method is used to measure the rate at which a polymer of that material melts and flows under specified conditions. This quality test is used to determine the melt flow index (MFI) of polymers along with improving manufacturing processes and checking product quality.

It consists of a high-quality interchangeable jet and a heated extruder tube made of carbon steel, the assembly being mounted on a metal box. Which surrounds its outer circumference which is heated through the bend heater at the time of testing. Through which the material during testing is taken out very easily. Also, there is a piston with dead weight which is used to create specified pressure on the material inside the extruder tube.

A PID controller is provided to indicate and control the tube temperature in the Asian Melt Flow Index. The heater used in this is filled with mineral wool insulation. At the bottom of the tube, an insulation of PTFE is used to prevent the extruder from sticking. The job of the extruder is to push the jet out. It is placed below the extruder tube in the equipment. Which is very hard because it is made from ground-die steel. A piston made of silver steel is provided at its upper end to push the material out of the jet in the apparatus. This piston goes inside the cavity of the tube.

This device uses a sleeve to direct the relief part of the piston. There is a plate form on top of the piston which holds the weight and also thermally insulates the load. The appliance has a sheet metal control panel mounted on its side which houses the digital preset timer, PID controller, and other major electronic components. Additionally, the Asian Melt Flow Index Tester comes with stoppers and cutters for tube cavities and jets for extrudate and cleaning equipment upon delivery.

Asian is a leading manufacturer of Melt Flow Index Testers. We offer the best prices for this laboratory testing equipment, which can help manufacturers determine the polymer melt flow rate. Our experience shows that the lower the MFI value, the higher the viscosity of the polymer and the greater its resistance to flow. With our high-quality laboratory testing equipment, manufacturers in the polymer industry can easily identify potential processing problems and ensure that their products meet performance requirements.

Body - Standard
Frequency - 50 Hz
Voltage - 230 V
Single Phase Vacuum Level - NA
Desiccators Diameter - NA
Rating - 5A
Timer - 9.9 minute (Digital
Actual Size - 12 (W) x 18 (D) x 24 (H)
Brand - Asian